Why Conventional Wood Restoration is Not As Good As Using Custom Coatings

img 6015ab37e7172

img 6015ab37e7172

Deck restoration is often an appealing option for homeowners who no longer have outdoor decks that are just nearing the end of their useful life and are searching for a method to bring them back to life Deck Restoration Melbourne. The basic method consists of sanding the exterior surface of the deck down to remove the previous finish, coating, and most importantly, stain.

After that, a new topcoat is applied to the newly revitalized deck. Although this method may seem easy, it can be risky because it requires using potentially harmful chemical substances.

Conventional Wood Restoration

If you are considering going this route for deck treatment, you need to be aware that there are some safety precautions you need to follow in order to protect yourself and your family from toxic chemicals. Find out more about the main deck restoration chemical substances you should avoid by reading on.

Acetone: One of the most popular deck stain removers today is acetone. This is actually an extremely hazardous substance as it is flammable and may even cause a fire if exposed to the open flame. You should never use this chemical substance to clean wooden surfaces as there is a high risk of causing an explosion or fire. In addition to this, there is a high possibility of discoloration to the wood if the chemicals come in contact with it.

Stain Remover Surfaces: Stain removers are also one of the top deck restoration chemicals you should avoid. These products work by lifting the dirt and grime from the surface of your wood. Unfortunately, there is a great risk of discoloration to the boards because they tend to pull the stains.

What happens is that the chemicals will eat away at the protective coating on the boards until it eventually breaks down completely. Aside from being a health hazard, these types of stains may also affect the value of your house.

Foam Board Drying Time: One big problem with foam boards is their high drying time. While they are very handy for doing the jobs around the pool and spas, they can also be highly damaging to decks. There are two reasons for this. The first is because of the foam itself, which has a tendency to expand while it is still wet. The second is because of its tendency to dry out quickly which will make the finish weak.

Bad Shape: One major problem with any type of stain deck material is the overall condition. No matter how good the stain is, if it’s not sealed properly it will begin to flake out. If left in its current bad shape, it will allow water to penetrate it and will then cause the wood to swell up. This will not just make it look bad, but it will also cause the surface to start to rot. When the outer layer of the wood starts to rot, the whole thing will deteriorate and turn into a very unsightly mess.

Spray on Paint: While there are some good things about using spray on coatings for conventional wood restoration, they can be tricky. In order to get the best results, the coating needs to be very thin. Furthermore, you have to move the furniture around to spread the coating to all the areas of the wood.

One other significant issue is the fact that it will need to be reapplied every few years. This is because wood is a living material and as it ages, it will need to continue to be protected from the elements.