Whether you’re installing a new roof or just doing a repair, roofing nails are important to help make sure the roof stays put and looks nice for years of San Antonio metal roofers. There are different types of nails you can use for your roof, depending on what type of roof you have and where it is located. For example, aluminum nails are ideal for asphalt shingles and metal roofs, while stainless steel nails are best for traditional roofs. Here are some other tips you should know about using roofing nails so you don’t end up making a costly mistake.
Types and Materials
First, find the right nail for the job. This is particularly important if you want to avoid an expensive professional repair. Nails are available in several different sizes, from one and a half inches to nine inches, depending on the thickness of the roofing nails you buy roof restoration or repairs in Sydney. Keep in mind that one-and-a-half-inch nails are generally enough to do light jobs around the house, such as a roofing nail head glued to a wooden picture frame. But if you have a thicker roof, you’ll need a nine-inch shank-length nail so you can have plenty of leverage and get a tight fit.
You also need to pick the right kind of nail for your roofing nails’ purpose. Flat head roofing nails are ideal for installing asphalt shingles and metal roofing nails because they’re usually easier to install than other types of nails. Most asphalt shingles are held together at the head by a glue that has a water-resistant component. If you use flat head roofing nails, you must make sure the glue is extremely water resistant, especially if you’re going to use it on a roof with clay tiles or other types of clay materials that might rot. Also, make sure the nail head is made from a hard metal that won’t rust when exposed to rain, snow, and ice.